Installation Checklist

NB – All Machines have been checked as fully operational prior to dispatch 

Action

Tick

Plug in the karaoke machine into a wall socket.

 

Starsinger 1000 On the rear of the karaoke machine insert the RED and WHITE cable into the RED and WHITE sockets  on the Karaoke Output section (see the first picture above)

Starsinger 2000 On the rear of the karaoke machine insert the RED and WHITE cable into the RED and WHITE sockets  marked by the letters FR and FL. (front left front right) or use the HDMI output for both music and microphones.

 

On the rear of the karaoke machine insert the YELLOW cable into the karaoke machines YELLOW socket.

 

On your TV insert the RED, WHITE and YELLOW into the TVs RED, WHITE and YELLOW sockets.

 

Turn on the karaoke machine and the TV.

 

Use the TV remote to select the AV channel that the coloured cables have been plugged into – It usually says AV on the remote or shows a picture of a TV screen.

At this stage you should see the Starsinger logo.

 

Using the karaoke remote control set the volume at 4.

 

Using the karaoke remote control set the echo at 0.

 

Insert a microphone and set the volume on the dial at “3 o’clock”

 

Insert a disc into the karaoke machine, select a track and press enter or play.

 

Increase the volume control ON YOUR TV to a level that you wish to sing at.

 

Test the microphones by speaking clearly into the top of the microphone – it should be very close to your lips.

 

Use the TV remote to increase the volume through your TV so you can hear the music and yourself.

 

“Tweak” the microphone controls if you want to raise or lower the vocal level if not at quite the desired level.